P0567 — Cruise Control « Resume » Signal

The diagnostic trouble code P0567 indicates a problem related to the « Resume » function within the cruise control system of a vehicle. This code typically points to an issue with the signal or circuit associated with resuming a set speed after the cruise control has been temporarily disengaged. It’s important to note that labels and codes can vary slightly between different vehicle manufacturers, but the core concept remains consistent.

—

Manufacturer variations for trouble code P0567

Different vehicle manufacturers often assign their own specific labels or codes for similar issues. When diagnosing or repairing, it is useful to be aware of these variations, as they can aid in faster identification and targeted troubleshooting.

• BMW: 5F33 – « Resuming Signal Malfunction »
• Ford: B1019 – « Cruise Resume Switch Circuit Malfunction »
• Volkswagen: 00244 – « Cruise Control Resume Signal Fault »
• General Motors (Chevrolet, GMC, etc.): P0567 – « Cruise Control Resume Circuit Malfunction »
• Honda: C1225 – « Cruise Control Resume Switch Circuit »

—

What does trouble code P0567 mean?

At its core, P0567 signifies that the Electronic Control Unit (ECU) — the vehicle’s brain that manages various systems — has detected an abnormality in the signal related to the cruise control « Resume » function. The cruise control system uses mechanical switches and electrical signals to maintain or resume a set speed. When this signal is interrupted, missing, or inconsistent, the ECU interprets it as a fault.

This code is typically triggered when the « Resume » switch of the cruise control is pressed or engaged, but the signal sent to the ECU does not match expected parameters. It could be caused by a faulty switch, wiring issues, or a problem within the cruise control module itself.

Generally, this issue appears in scenarios where the driver attempts to resume a previous cruising speed, but the system fails to recognise the command properly. This can happen repeatedly, leading to the illumination of the warning light or warning message on the dashboard.

—

Severity and risks of trouble code P0567

The P0567 code is considered of moderate severity. It primarily impacts the cruise control system’s ability to function correctly, and it does not typically pose an immediate safety risk or affect the vehicle’s core driving functions. However, it can be inconvenient, especially if you rely heavily on cruise control for long-distance driving or highway cruising.

Potential risks include occasional inability to resume maintained speed, or the cruise control system being completely disabled until the fault is repaired. But overall, the vehicle remains drivable, and this fault does not threaten the basic safety or drivability of the vehicle.

Can the vehicle be driven? Yes, but with limited cruise control functionality.

—

Symptoms of trouble code P0567

When this fault code is active, you might notice some of the following symptoms:

• Illumination of the cruise control warning light on the dashboard
• Inability to use the resume function when the cruise control is engaged
• Intermittent or no response when pressing the « Resume » button
• Warning messages on the instrument cluster
• Possible fluctuation in cruise control operation

In many cases, drivers may notice that the cruise control system refuses to resume a set speed after being temporarily disengaged or when pressing the « Resume » switch, causing frustration during highway drives.

—

Most likely causes of trouble code P0567

Diagnosing P0567 involves understanding common underlying issues. Although each vehicle may present unique circumstances, the most probable causes tend to follow a predictable pattern:

1. Faulty or worn “Resume” switch: The switch itself may be broken, stuck, or not registering inputs correctly.
2. Wiring issues or poor electrical connections: Damaged, corroded, or disconnected wiring leading to the cruise control module or switch can disrupt signals.
3. Malfunction of the cruise control module: The controller that manages cruise functions may have internal faults or software issues.
4. Faulty or damaged cruise control servo or actuator: Mechanical or electrical failure within the cruise control actuator may affect signal transmission.
5. Other related circuit problems: Blown fuses, relay issues, or grounding problems affecting the circuit associated with the resume function.

—

How to diagnose trouble code P0567

Diagnosing this code involves a combination of visual inspections and testing electrical signals. Here are some standard steps to undertake:

1. Visual inspection: Check the condition of the cruise control switches, wiring, connectors, and fuses related to the cruise control system. Look for corrosion, damage, or disconnection.
2. Verify the fault with live data: Using an OBD-II scanner with live data capability, observe the signal when pressing the « Resume » switch. Confirm if the ECU receives the expected signal.
3. Test switch functionality: Remove and test the « Resume » switch with a multimeter or via the vehicle’s wiring diagram to ensure it functions properly.
4. Check wiring continuity and resistance: Inspect wiring harnesses for continuity, damage, and proper grounding. Repair as necessary.
5. Scan for related codes: Check if other codes exist that could influence the cruise control system behavior and address them accordingly.

—

Possible repairs for trouble code P0567

Based on the identified causes, here are some potential repairs. Note that some repairs can be performed by a skilled DIY enthusiast, while others might require professional intervention.

• Replace the “Resume” switch: If the switch is faulty or stuck, installing a new switch is often a straightforward, inexpensive fix. This is a basic repair.
• Repair or replace damaged wiring: Fixing broken wiring, replacing connectors, or cleaning corrosion spots can restore proper signals. Usually a moderate repair.
• Reprogram or replace the cruise control module: If the module itself is malfunctioning, reprogramming or replacing it under the guidance of a professional is recommended.
• Check and replace related fuses and relays: Sometimes, simple fuse replacement can resolve electrical issues.
• Address grounding issues: Ensuring all ground connections associated with the cruise control circuit are secure can often fix signal problems.

—

Vehicles commonly associated with trouble code P0567 in Europe

This fault code has been reported across various makes and models. In European markets, vehicles from several brands are known to exhibit this issue, especially those with cruise control systems integrated into their electronic architecture.

Commonly affected brands include:

• Volkswagen Group (Volkswagen, Audi, Seat, Škoda) – various engine families
• BMW – especially models with fully electronic cruise control systems
• Ford – certain models equipped with active cruise control modules
• Peugeot and Citroën – models with integrated cruise control functions

—

Frequent mistakes with trouble code P0567

Diagnosing and repairing this fault correctly is essential. Common mistakes to avoid include:

• Assuming the switch is always faulty without testing: A visual check alone may miss wiring or circuit issues.
• Replacing parts without proper diagnosis: Blindly replacing switches or modules can be costly and unnecessary.
• Neglecting wiring and connections: Corrosion, damaged connectors, and grounding issues are often overlooked causes.
• Using incompatible or counterfeit parts: Only genuine or OEM parts should be used for critical components.

—

FAQ — trouble code P0567

Can this code disappear on its own?
No, P0567 generally persists until the underlying issue is addressed. Intermittent connections might temporarily resolve, but the fault can reoccur.

Can I keep driving?
Yes, but with limited cruise control functions. If the cruise control warning light is on, it indicates the system is disabled, but the vehicle remains safe to drive.

Why does the code return after clearing it?
The fault is caused by a persistent issue, such as a faulty switch or wiring problem. Clearing the fault temporarily resets the system, but if the root cause remains, the code will likely return.